top of page
CDT UK IRELAND.PNG
Elektronik için
Dijital Endüstri Çözümleri
Siemens Solution Partner.png
tech day web banner v3 (1).jpg

CDT TECH DAY 2023

Elektronik Tasarım ve Üretim Dünyasındaki Yeni Teknolojileri ve Uygulamaları Keşfetmeye Hazır Mısınız?

21 Haziran 2023 tarihinde, Divan Ankara Otel Çankaya'da gerçekleşecek olan "CDT TechDay 2023" etkinliği, elektronik teknolojileri dünyasındaki en son gelişmeleri takip etmek ve elektronik ile kablolama konularında tasarım, üretim ve test teknolojileri alanındaki yenilikleri, konularındaki en uzman kişilerden öğrenmek için mükemmel bir fırsat sunuyor.

Savunma, havacılık, otomotiv ve dayanıklı tüketim sektörlerinin önde gelen profesyonellerinin katılacağı etkinliğimizde geçtiğimiz yıllarda olduğu gibi altta detaylarını bulacağınız uygulama alanlarında hem teknolojik yenilikleri, hem sektörel gelişmeleri hem de dünyada ve Türkiye deki başarılı uygulamaları siz değerli katılımcılar ile paylaşmayı hedefliyoruz.

Genel oturumlarda "Reinventing the Industry: Additively Manufactured Electronics ", "Driving Innovations with Siemens Digital Threads ", gibi bizi bekleyen gelişmelerin yanı sıra MEXT Teknoloji Merkezi ile yapılan çalışmaları ve Xcelerator Technology Innovation Awards Ödül törenini sizlerle buluşturacağız.

CDT Tech Day 2023'te konuları hakkında uzman konuk ve konuşmacıların ve müşterilerimizin deyimleri ile yer aldığı pek çok sunum ve uygulama yer alacak.

Etkinlik konuşmacılarını, programını ve oturumlarını aşağıda inceleyebilirsiniz

CDT TECH DAY 2023
ETKİNLİK TAKVİMİ

21 HAZİRAN 2023

General

GENERAL SESSION

08:30 - 09:00

Registration

09:00 - 09:30

Subject:

Welcome

Opening Session
•    Introduction of guests and agenda
•    Technology trends and reflections
•    Update from CDT

Presenter:

Alpay GÖĞÜŞ - CDT - CEO

Alpay Göğüş is the Founder and the CEO of CDT. Alpay is a seasoned executive and accomplished entrepreneur with more than thirty years experience in launching start-ups and accelerating growth in established organisations. He has expertise in every aspect of building and growing international reseller organisations, partnerships and channel structures.  Investing in high tech electronics design, manufacture and development since 1989 and worked in evolution of Electronics market in Turkey with the biggest players in that field. Providing solutions and technologies in Defence, Automotive, Consumer and almost every player in Electronics field for their digital transition to Industry 4.0 and Digitalisation activities.

09:30 - 10:15

Subject:

Reinventing the Industry: Additively Manufactured Electronics

•    Nano Dimension – Changing the way world manufactures
•    Why Additive Manufacturing is reinventing Electronics
•    How leading organisations around the world innovate through high performance electronic devices

Presenter:

Valentin Storz - General Manager, Europe Middle East & Africa Nano Dimension

Valentin Storz is Nano Dimension’s General Manager of EMEA. Mr. Storz has more than 15 years of experience in building up businesses for innovative tech companies. Prior to Nano Dimension, Mr. Storz has worked in the additive manufacturing industry for MakerBot/Stratasys in various leadership positions and served as General Manager for MakerBot EMEA. Earlier in his career he had worked as management consultant for strategy, growth, restructuring and innovation across various industries. Mr. Storz holds a M.Sc. Diploma in Business Administration and Engineering from the University of Stuttgart, Germany and the University of Luela, Sweden.

10:15 - 10:30

Subject:

Siemens Digital Industries Software in Turkey

The presentation will reveal the history of the development of Siemens Digital Industries Software in Turkey, key competencies, customers, projects and the future development of the company in Turkey.

Presenter:

Sergey Martynov  - Siemens Digital Industries Software Business Development Director for Turkey

Sergey is a passionate and experienced industry automation and digitalisation professional. Sergey started his career path in the Aerospace & Defence industry where he had various positions including design and manufacturing engineer, quality and manufacturing process manager. In 2007, he joined Siemens Digital Industries Software and has been responsible for consulting and implementing Siemens solutions for key customers in the Aerospace, Automotive, Machinery, Marine and Electronics industries, as well as for business development and launching products and solutions of the Siemens Xcelerator portfolio to the market. He has been appointed Business Development Director for Turkey in 2022.

10:30 - 11:00

COFFEE BREAK

11:00 - 11:45

Subject:

Driving Innovations with Siemens Digital Threads

Join us for an engaging presentation as we delve into the world of Siemens solutions for the automotive & transportation industry. Discover the challenges faced by OEMs and suppliers, and gain insights into Siemens' visionary approach to transforming the industry. Through an exploration of Digital Threads for Automotive and Transportation, we will showcase how Siemens solutions enable end-to-end connectivity, data-driven decision-making, and operational excellence. Prepare to be inspired by success stories that highlight the tangible benefits and transformative power of Xcelerator, as we pave the way towards a connected and efficient future in the automotive sector.

Presenters:

Timofey Kuklin -  Business Development Consultant Siemens Digital Industries Software 

Timofey Kuklin , an experienced business development consultant, has been an integral part of Siemens for the past 5 years. With a wealth of experience in the automotive industry, Timofey has had the privilege of working with esteemed OEMs and suppliers in Russian and Turkey. In his role, he excels at helping these clients embark on their digitalization journey, utilizing complete Siemens portfolio to drive successful initiatives and foster innovation in the ever-evolving automotive landscape.

Çağrı Bostancı  - Partner Sales Executive Siemens Digital Industries Software

Çağrı Bostancı is a mechanical engineer.  He is working with Automotive OEM’s and suppliers more then 10 years. After working for a Siemens partner 4 years he joined Siemens 1 year ago. His expertise is Business Development for engineering simulation and design.

11:45 - 12:15

Subject:

Fostering Manufacturing Digitalization with Global Test Bed - MEXT Presentation

Presenter:

Tunç Acarkan - Director of Technology Management at MEXT Technology Center

tunc.jpg

Since September 2022, Tunç Acarkan has been working as the Director of Technology Management at MEXT Technology Center established by the Turkish Employers' Association of Metal Industrialists (MESS). Tunç Acarkan, who is primarily responsible for artificial intelligence technologies at MEXT, also manages the Artificial Intelligence Platform at the Center for the Fourth Industrial Revolution Turkey (WEF C4IR), affiliated to the World Economic Forum network, established by the Turkish Employers' Association of Metal Industrialists (MESS) in cooperation with the Ministry of Industry and Technology. C4IR Turkey creates policy frameworks for IoT, Artificial Intelligence and Mobility technologies enabling a multi-stakeholder approach. Focusing on the manufacturing industry, C4IR Turkey leverages its ability to reach executives and key decision makers to lead the governance of Industry 4.0 technologies to shape the future of manufacturing and industry. Tunç Acarkan, who works in the field of responsible use of artificial intelligence and industrial applications, received his bachelor's degree in Mechatronics Engineering from Sabancı University. Prior to his role at MEXT, he worked for international robotics and image processing companies for 15 years as a Business Development and Sales operations leader in the region covering Turkey, Middle East and Africa.

12:15 -12:30

Subject:

Xcelerator Technology Innovation Awards

Presenter:

Alpay GÖĞÜŞ - CDT - CEO

12:30 -13:30

LUNCH

PCB

PCB (SI/PI/PCB DESIGN) STREAM

13:30 - 14:15

Subject:

Advanced technologies and system design for hardware designers​

During this session you will learn how to deal with:
Physical System Design and 3D Multi-Board Collaboration
Assembly File Management
Layout Assembly Collaboration
3D DRC
Board to Board Connectivity
Multi-Board Constraints & Tuning

Presenter:

Olivier Arnaud - Application Engineer Consultant Siemens EDA

Olivier Arnaud is helping Siemens EDA customers all over the world for almost 28 years. Started as a Design Engineer in 1987, he worked with such names as RISC, Dassault, Alcatel for ASIC design and then joined Mentor Graphics as Application Engineer Consultant. Now he is capable to hold all PCB products questions and trainings.

14:15 - 15:00

Subject:

Customer presentations    

ARÇELİK

SBS ARGE

Presenters:

Rehagür Dalkıran- Lead R&D Hardware Engineer Arçelik Global

Rehagur Dalkiran has 9+ years of experience in electronics development. He is Lead Schematic Designer & PCB Layout Engineer specialized in digital high-speed at Arçelik A.Ş. His career related to Customer Electronic, Military Network, Medical, Automotive Industry  

Serhat Soğukkuyu

Serhat Soğukkuyu is a PCB Design Specialist with 17 years of experience in PCB design. During his career he worked in companies such as UDEA, MIKES, ASELSAN, EHSİM and TAI. In 2022, he founded his own company SBS ARGE.
Main skills are PCB design, design consultancy, PCB design trainings and reverse engineering. He also contributes to the development of young engineers by mentoring at various events. His goal is to provide the highest quality design service to customers and lead them to successful projects.

15:00 - 15:30

COFFEE BREAK

15:30 - 17:00

Subject:

Tips and Tricks for PCB Designer

During this session, you will learn some tricks related to tool usage that will help any engineer to save his time and effort on harder tasks.

Presenter:

Senior Application Engineer  CDT AS

CDT AS Senior.png

17:00 - 17:30

CLOSING SESSION & GIFTS & DRAWING

reliability

RELIABILITY ENGINEERING STREAM

Presenter:

Daniel Chan - Chief Operating Officer PHM Technology

Daniel Chan is currently the Chief Operating Officer at PHM Technology. He graduated with B.Sci and B.Eng (SysEng). Since graduating, he has worked at PHMT as an engineer working on various projects across different domains such as automotive, industrial to aerospace and defence. His interests are in the design of optimized model-based processes and methodologies to enable efficient and consistency for engineering analyses. 

13:30 - 14:15

Subject:

High-level capabilities of MADe Platform, Maintenance Aware Design Environment

It consists of a high level capabilities / benefits presentation which will outline the capabilities of MADe and the advantages it will bring to each organization

14:15 - 15:00

Subject:

High-level capabilities of MODe Platform, Maintenance Optimization & Diagnostics Environment

It is an introduction of newly developed MODe (Maintenance Optimization and Diagnostics Environment) Platform along with MADe. More specifically, Syndrome Diagnostics features (Predictive Fault Identification) will be discussed

15:00 - 15:30

COFFEE BREAK

15:30 - 17:00

Subject:

Demonstration of MADe Software

General features (generating digital risk twin of a system, risk assessment, failure simulation, FMECA, Fault Tree analyses etc…) of the tool be shown during the session

17:00 - 17:30

CLOSING SESSION & GIFTS & DRAWING

ICD

IC DESIGN & VERIFICATION STREAM

Presenter:

Faïçal Chtourou - European Application Engineer Siemens EDA

faical.png

Faïçal Chtourou, a European application engineer at Siemens EDA, has expertise in Digital functional verification tools and methodology. With over a decade of experience verifying complex SOCs across diverse markets such as HPC, Automotive, and Flash memory, he is keenly interested in automating flows and enhancing RTL quality. Faïçal graduated with an MS degree in Microelectronics and Telecommunication from Polytech Marseille, France.

PART 1

13:30 - 14:15

PART 2

14:15 - 15:00

Subject:

Using CI to improve your verification flow

Although Continuous Integration (CI) is commonly used in software development, it can also provide substantial benefits in improving the verification flow for hardware design. By automating the build and test process, this presentation will demonstrate how CI can boost the efficiency and effectiveness of verification activities, resulting in superior quality designs, as well as improved project planning and tracking.

15:00 - 15:30

COFFEE BREAK

15:30 - 17:00

Subject:

Python, an alternative to your VHDL testbench

With the rise in design complexity, constrained randomization, and functional coverage become key elements to a successful project.
Over the years, SV-UVM has gained ground but due top high learning time/benefit ratio many users were not convinced and preferred to look into other alternatives such as UVVM/OSVM,
A third option has emerged during the last years and it is growing quickly, it has undeniable advantages (easy language, big community, large library …)
The purpose of this presentation is to show you how we can  enable designers to check their design through the usage of Python Library/framework without the need of learning SystemVerilog complex language  

17:00 - 17:30

CLOSING SESSION & GIFTS & DRAWING

SMART MANUFACTURING STREAM

smart

13:30 - 14:15

Subject:

Digitalising Electronics Manufacturing in Aerospace & Defense

•    Addressing New Product Introduction Challenges 
•    Optimising engineering and manufacturing resources through effective scheduling 
•    Improved visibility, traceability and quality on the shop floor

Presenter:

İbrahim GÖĞÜŞ - Head of Business Development CDT

ibrahim g.jpg

As the head of Business Development for CDT; Ibrahim works with our customers in transforming their electronics engineering and manufacturing operations with the help of cutting edge software and hardware solutions in our portfolio. As an enterprise information technology executive and entrepreneur, Ibrahim has over 35 years’ experience in sales, presales, consulting and product development. He has built and managed successful technology organisation across Europe, Middle East and Asia. His experience spans a wide array of technology solutions from Manufacturing Operations Management to Industrial IoT, from Additive Manufacturing/3D Printing to ERP solutions. Ibrahim has a BSc in Control & Computer Engineering from Istanbul Technical University and Executive MBA from University of Edinburgh & ENPC.

14:15 - 15:00

Subject:

Intraplant Logistics for Electronics & Electrical Systems Manufacturing

•    Opening the black box: getting full visibility of material flow within your factory
•    End to end material management for your components, consumables, connectors, cables from incoming materials to finished product
•    Managing material flow to your equipment as well as manual assembly stations.

Presenter:

İbrahim GÖĞÜŞ - Head of Business Development CDT

15:00 - 15:30

COFFEE BREAK

15:30 - 17:00

Subject:

Additive Manufacturing in Aerospace, Defense & Automotive

•    Introducting DragonFly IV  3D Printer
•    Innovating with AME: Use Cases in Key Industries
•    A New Age in Antenna & RF Design & Manufacturing with AME

Presenter:

Mirko Sidoti  - EMEA Sales Manager Nano Dimension

mirko sidoti.jpg

Mirko Sidoti is currently working as EMEA Sales Manager at Nano Dimension. He is responsible for AME (Additively Manufactured Electronic) in Southern and Eastern Europe, plus Nordics. Mirko has 13+ years of experience in custom and complex solutions Sales Management, in B2B and B2G international contexts.  Before starting to work in sales, Mirko served as RF & Microwave engineer at Thales Alenia Space and the former Wind-Infostrada Group. As an expert in Electromagnetics, Mirko also collaborated with Roma Tre University in the field of Metamaterials. Mirko has a M.Sc degree in RF & Microwave engineering and an Executive Master in Management from Politecnico di Milano University. 

17:00 - 17:30

CLOSING SESSION & GIFTS & DRAWING

integrated

INTEGRATED ELECTRICAL SYSTEMS DESIGN STREAM 

13:30 - 14:15

Subject:

Transform E/E Systems Development with Capital

The increasingly complex world of systems design and engineering is a challenge that is not going away any time soon. Electric and autonomous demands are already changing the automotive landscape, vertical takeoff and landing vehicles (eVTOL) have the power to transform the air traffic ecosystem. Product modeling in all disciplines, including mechanical, electrical and electronics, and software, is necessary to reach ever-increasing profitability and production goals while facing head-on regulatory, safety, and security challenges. Yet the industry suffers from outdated, disconnected methods that do not scale and cannot manage the inherent increase in E/E complexity and safety demands. This session will examine how increasing digitalization of enterprises is vital for organizations looking to address these challenges and be successful in the market. Learn how Xcelerator’s integrated solutions and innovative model-based engineering enable data-driven program orchestration, agile product development, and reliable verification with a digital thread that eliminates data silos and simplifies certification and compliance.

Presenter:

Nuri Zughaid - EMEA Portfolio Development, Integrated Electrical Systems Siemens Digital Industries Software

nuri zughaid.png

Responsible for the business development of the Integrated Electrical Systems solutions (Capital) within EMEA. His background includes 27 years of experience in industry, working within engineering software sales, first and second line product support, training, plus within R&D product management - delivering solutions to companies in the electrical controls, automotive, aerospace and harness domains.
 
I love sharing my product and industry knowledge with my network and learning about new applications.  With a strong understanding of the challenges in electrical systems integration, harness manufacture and maintenance for large and small automotive, aerospace and machinery customers.
Always open to discussing the ways that Siemens Digital Industries Software integrated electrical solutions can be used to improve quality, shorten design cycle times and reduce manufacturing costs.

14:15 - 15:00

Subject:

Using Capital Technology to Achieve Regulatory Compliance

Using Capital Technology to Access and Validate Engineering Type Data

Electrical complexity in aerospace continues to increase. This adds certification risk for complex platforms. Type Certification (TC) is a program milestone with high visibility that’s crucial to timely revenue recognition.


Embedding Capital (Converge, Change Illustrator and Publisher) over a PLM system for automated validation:
1. Between wiring diagrams and harnesses (converge)
2. Between iterations and revisions of designs (Change Illustrator)
3. Between the Production green A/C and Completions Engineering EWIS

Presenters:

Michael Shpits - Pre-Sales consultant EMEA - Integrated Electrical Systems Siemens Digital Industries Software

michal sh.png

Pre-Sales consultant for Integrated Electrical Systems solutions (Capital) within EMEA, with a strong background in Electrical systems integration and Wiring design in the Aerospace industry, backed by over 15 years of hands-on experience.
My primary objective is to assist Engineers worldwide in designing Electrical Systems by equipping them with the finest tools, enabling them to focus on engineering challenges rather than drawing obstacles. I am constantly eager to learn from professionals across the globe and share my knowledge with them.

Nuri Zughaid - EMEA Portfolio Development, Integrated Electrical Systems Siemens Digital Industries Software

15:00 - 15:30

COFFEE BREAK

15:30 - 17:00

Subject:

How to Achieve Continous Electrical and Mechanical Integration with NX and Capital

Leveraging First Pass Generative Workflow

This Realize Live seminar focuses on Capital integrations with Xcelerator MCAD tools to support a multi-domain engineering environment. This seminar demonstrates multiple use cases to understand Capital integration capabilities and how they can be leveraged to solve complex customer challenges.

How first pass generative workflow can be used in Aerospace applications to shorten product development lifecycles
Showing the evolution of Bell’s utilization of Capital over the years. Focusing on our current generative process leveraging Capital Design and our custom scripts to minimize time and manpower needed to fully design and integrate the wiring of future air vehicles.

Presenters:

Michael Shpits - Pre-Sales consultant EMEA - Integrated Electrical Systems Siemens Digital Industries Software

Nuri Zughaid - EMEA Portfolio Development, Integrated Electrical Systems Siemens Digital Industries Software

17:00 - 17:30

CLOSING SESSION & GIFTS & DRAWING

xjtag

XJTAG WORKSHOP STREAM

Presenter:

Alan Walbridge  - Senior Application Engineer XJTAG

alan wall.png

Alan Walbridge (MEng, Cambridge) is a Senior Application Engineer at XJTAG with 9 years of experience. His work involves setting up complex boards for boundary scan testing, managing the development of XJEase test scripts for families of chips, training customers, and working with the software team to design and test the new features of XJTAG

13:30 - 14:15

Subject:

Interacting with JTAG devices

Introduction to JTAG / boundary scan theory; connecting live to a JTAG chain; inspecting and using the boundary scan register using XJAnalyser

14:15 - 15:00

Subject:

Using Automated Tests

Using the production line tool XJRunner to identify faults on a board

15:00 - 15:30

COFFEE BREAK

15:30 - 17:00

Subject:

Describing a Circuit to Enable JTAG Testing

Using the development tool XJDeveloper to bring in PCB data and produce a set of tests

17:00 - 17:30

CLOSING SESSION & GIFTS & DRAWING

CAPITAL USERS MEETING

capital

22 HAZİRAN 2023

09:00 - 09:45

Subject:

Transform E/E Systems Development with Capital

The increasingly complex world of systems design and engineering is a challenge that is not going away any time soon. Electric and autonomous demands are already changing the automotive landscape, vertical takeoff and landing vehicles (eVTOL) have the power to transform the air traffic ecosystem. Product modeling in all disciplines, including mechanical, electrical and electronics, and software, is necessary to reach ever-increasing profitability and production goals while facing head-on regulatory, safety, and security challenges. Yet the industry suffers from outdated, disconnected methods that do not scale and cannot manage the inherent increase in E/E complexity and safety demands. This session will examine how increasing digitalization of enterprises is vital for organizations looking to address these challenges and be successful in the market. Learn how Xcelerator’s integrated solutions and innovative model-based engineering enable data-driven program orchestration, agile product development, and reliable verification with a digital thread that eliminates data silos and simplifies certification and compliance.

09:45 - 10:30

Subject:

Producing EWIS Compliant Wiring Diagram Manuals

Impact Networking, an expert in technology implementation, will showcase how they've used low-code to transform logistics operations for various customers. The Impact team will showcase an application built for an oversized freight brokering company that allows customers to get quotes on oversized freight as quickly as they can get a quote from UPS to send a package. In instances of immense complexity, such as moving an entire house from St. Louis to Tampa, this application (and many others) are disrupting the status quo of this niche industry.

10:30 - 11:00

COFFEE BREAK